Specialty Microscope Slides
Biogenex Laboratories Barrier Slides
Barrier slides are suitable for use with frozen tissue sections, formalin-fixed paraffin sections, and cytology preparations. The slide's positive charge forms a bond with the tissue or cell preparation. Specimens adhere to the slide and remain in place during the staining procedures. Although virtually permanent, please note that upon opening the package, the positive charge will very slowly dissipate over time. Using the Barrier slides, cell and tissue loss are virtually eliminated during the microwave Antigen Retrieval* method, enzyme digestion, DNA denaturation and RNA hybridization. Positive-Charged Barrier Slides contain hydrophobic barriers which creates reaction micro chamber, that allow the quantity of reagents per slide to be tailored to the size of the specimen. These slides eliminate reagent waste without the need to use a PAP pen, thus reducing setup time.
Electron Microscopy Sciences HybriWell™ Sealing System Port Seal Tab, 7.62 x 0.6 mm
HybriWell Sealing Chambers System seals to a microscope slide surface enclosing a single or multiple specimens in a small reagent volume. They are suitable for most protein and nucleic acid assays. Access ports in the chamber surface allow for the addition or removal of reactants and posrts are easily sealed using adhesive seal tabs (provided) to prevent reagent evaporation. These sealed chambers are watertight and can be used for water-bath incubations. RNase free, hydrophobic surfaces will not trap or bind probes. Disposable chamber remove cleanly and easily even after heating. Coms with non-adhesive peeling tab.
Chamber: 7.62 x 0.6 mm
Electron Microscopy Sciences S-50 Sedgewick Rafter, Plastic
Used to create precise volumes of liquid to enable counting of particles in a specified volume of liquid. For use in water analysis, culture inspection, and any fluid where particles per unit volume need to be determined. Each cell is supplied with one cover glass. An economically priced plastic cell. Cell is supplied with one cover glass.
Electron Microscopy Sciences ProPlate™ MicroArray Slide Slide Module 3 Well, 18 x 20 mm I.D., Stainless Steel Clips
ProPlate re-usable, multi-well chambers fit 25 x 75 mm glass microscope slides. Chambers depth of 7.5 mm. Stainless steel Spring Clips are used with laser fabricated glass slides that may have micro-fractures or chipped edges.
I.D.: 18 x 20 mm
Includes: Stainless Steel Clips
Electron Microscopy Sciences ProPlate™ MicroArray Slide Tray Set 16 Well, 7 x 7 mm I.D., Stainless Steel Clips
ProPlate integrates microscope slide based array technology with automated microtiter plate processing. Up to 64 individual arrays can be assayed per slide. Four slides fit into a tray, producing a modular plate with a standard microtiter plate footprint and well spacing allowing automated robotic processing of up to 256 arrays.
Up to 64 leak-proof wells on any slide surface without the use of adhesive. Microtiter plate well spacing facilitates use with multichannel pipettes. 7 x 7 mm square well are ideal for high content arrays. 5 – 350 uL well volumes accommodate small reagent and large wash volumes.
Each ProPlate Tray Set includes: 4 Slide modules, 8 Snap clips, 1 Tray and Cover, 10 seal strips and one applicator. Tray conforms to SBS standards for footprint (81.7 mm width x 123.7 mm length) and well spacing.
I.D.: 7 x 7 mm
Includes: 8 Stainless Steel Spring Clips, Tray, Cover, 10 Seal Strips and 1 Seal Strip applicator
Electron Microscopy Sciences ProPlate™ MicroArray Slide Slide Module 16 Well, 7 x 7 mm I.D., Stainless Steel Clips
ProPlate re-usable, multi-well chambers fit 25 x 75 mm glass microscope slides. Chambers depth of 7.5 mm. Stainless steel Spring Clips are used with laser fabricated glass slides that may have micro-fractures or chipped edges.
I.D.: 7 x 7 mm
Includes: Stainless Steel Clips
Electron Microscopy Sciences ProPlate™ MicroArray Slide Tray Set 1 Well, 16.5 x 34 mm I.D., Stainless Steel Clips
ProPlate integrates microscope slide based array technology with automated microtiter plate processing. Up to 64 individual arrays can be assayed per slide. Four slides fit into a tray, producing a modular plate with a standard microtiter plate footprint and well spacing allowing automated robotic processing of up to 256 arrays.
Up to 64 leak-proof wells on any slide surface without the use of adhesive. Microtiter plate well spacing facilitates use with multichannel pipettes. 7 x 7 mm square well are ideal for high content arrays. 5 – 350 uL well volumes accommodate small reagent and large wash volumes.
Each ProPlate Tray Set includes: 4 Slide modules, 8 Snap clips, 1 Tray and Cover, 10 seal strips and one applicator. Tray conforms to SBS standards for footprint (81.7 mm width x 123.7 mm length) and well spacing.
I.D.: 16.5 x 34 mm
Includes: 8 Stainless Steel Spring Clips, Tray, Cover, 10 Seal Strips and 1 Seal Strip applicator
Electron Microscopy Sciences ProPlate™ MicroArray Slide Slide Module 16 Well, 6 mm I.D., Stainless Steel Clips
ProPlate re-usable, multi-well chambers fit 25 x 75 mm glass microscope slides. Chambers depth of 7.5 mm. Stainless steel Spring Clips are used with laser fabricated glass slides that may have micro-fractures or chipped edges.
I.D.: 6 mm
Includes: Stainless Steel Clips
Electron Microscopy Sciences ProPlate™ MicroArray Slide Tray & Cover for Snap Clip Modules
Organize up to 4 chambered slides into the footprint of a microtiter plate for use with automated liquid handling robots or plate washers.
Electron Microscopy Sciences ProPlate™ MicroArray Slide Tray Set 3 Well, 18 x 20 mm I.D., Delrin Snap Clips
ProPlate integrates microscope slide based array technology with automated microtiter plate processing. Up to 64 individual arrays can be assayed per slide. Four slides fit into a tray, producing a modular plate with a standard microtiter plate footprint and well spacing allowing automated robotic processing of up to 256 arrays.
Up to 64 leak-proof wells on any slide surface without the use of adhesive. Microtiter plate well spacing facilitates use with multichannel pipettes. 7 x 7 mm square well are ideal for high content arrays. 5 – 350 uL well volumes accommodate small reagent and large wash volumes.
Each ProPlate Tray Set includes: 4 Slide modules, 8 Snap clips, 1 Tray and Cover, 10 seal strips and one applicator. Tray conforms to SBS standards for footprint (81.7 mm width x 123.7 mm length) and well spacing.
I.D.: 18 x 20 mm
Includes: 8 Delrin Snap Clips, Tray, Cover, 10 Seal Strips and 1 Seal Strip applicator
Electron Microscopy Sciences ProPlate™ MicroArray Slide Tray Set 4 Well, 16 x 16 mm I.D., Stainless Steel Clips
ProPlate integrates microscope slide based array technology with automated microtiter plate processing. Up to 64 individual arrays can be assayed per slide. Four slides fit into a tray, producing a modular plate with a standard microtiter plate footprint and well spacing allowing automated robotic processing of up to 256 arrays.
Up to 64 leak-proof wells on any slide surface without the use of adhesive. Microtiter plate well spacing facilitates use with multichannel pipettes. 7 x 7 mm square well are ideal for high content arrays. 5 – 350 uL well volumes accommodate small reagent and large wash volumes.
Each ProPlate Tray Set includes: 4 Slide modules, 8 Snap clips, 1 Tray and Cover, 10 seal strips and one applicator. Tray conforms to SBS standards for footprint (81.7 mm width x 123.7 mm length) and well spacing.
I.D.: 16 x 16 mm
Includes: 8 Stainless Steel Spring Clips, Tray, Cover, 10 Seal Strips and 1 Seal Strip applicator
Electron Microscopy Sciences ProPlate™ MicroArray Slide Slide Module 64 Well, 3.5 x 3.5 mm I.D., Stainless Steel Clips
ProPlate re-usable, multi-well chambers fit 25 x 75 mm glass microscope slides. Chambers depth of 7.5 mm. Stainless steel Spring Clips are used with laser fabricated glass slides that may have micro-fractures or chipped edges.
I.D.: 3.5 x 3.5 mm
Includes: Stainless Steel Clips
Electron Microscopy Sciences ProPlate™ MicroArray Slide Tray Set 1 Well, 16.5 x 70 mm I.D., Stainless Steel Clips
ProPlate integrates microscope slide based array technology with automated microtiter plate processing. Up to 64 individual arrays can be assayed per slide. Four slides fit into a tray, producing a modular plate with a standard microtiter plate footprint and well spacing allowing automated robotic processing of up to 256 arrays.
Up to 64 leak-proof wells on any slide surface without the use of adhesive. Microtiter plate well spacing facilitates use with multichannel pipettes. 7 x 7 mm square well are ideal for high content arrays. 5 – 350 uL well volumes accommodate small reagent and large wash volumes.
Each ProPlate Tray Set includes: 4 Slide modules, 8 Snap clips, 1 Tray and Cover, 10 seal strips and one applicator. Tray conforms to SBS standards for footprint (81.7 mm width x 123.7 mm length) and well spacing.
I.D.: 16.5 x 70 mm
Includes: 8 Stainless Steel Spring Clips, Tray, Cover, 10 Seal Strips and 1 Seal Strip applicator
Electron Microscopy Sciences Borosilicate Capillary Glass Slide, 0.10x2.0 mm, 100 mm, 0.100 Wall thick
Micro glass slides are precision rectangular glass capillary tubes for use in microscopic viewing of liquid samples. Capillary action instantly collects the sample and the thin glass walls minimize evaporation. The design of these cells eliminates the needs for cover glass and the hanging drop method.
Made from Corning 7740 borosilicate, low expansion, type I glass, these micro glass slides can withstand heat up to 500 degree C. Samples can be retained for future reference by sealing or cementing open ends.
Micro glass slide are packaged in plastic vials.
I.D. tolerance +/- 10% and wall tolerance +/- 20%.
I.D.: 0.10 x 2.0 mm
Length: 100 mm
Wall thickness: 0.100